Routing of link behaving a bit strange - Diagramming Components

(UTC)

MindFusion Forums › Diagramming Components › WPF › Routing of link behaving a bit strange

(Moderator: Slavcho)

‹ Previous Topic | Next Topic ›

Pages: 1

Routing of link behaving a bit strange (Read 1622 times)

Kim Lill�s YaBB Newbies Offline I Love MindFusion! Posts: 26 Joined: Aug 18^th, 2016	Routing of link behaving a bit strange Oct 19^th, 2016 at 8:00am	Print Post
	Hi, I have a node with a single anchor point in the middle. I have set node Obstacle = false. Routing is a bit wonky, seems like the link always wants to exit in the north while I would be perfectly happy if it exits south when the connecting node is south. Any advice? Greetings, Kim

	pic.png (Attachment deleted)
	IP Logged

Slavcho YaBB Moderator Offline tech.support Posts: 3439 Joined: Oct 19^th, 2005	Re: Routing of link behaving a bit strange Reply #1 - Oct 19^th, 2016 at 5:56pm	Print Post
	Hi Kim, Seems the grid router expects that a link is connected to a node's border, and the node is a obstacle (for VicinityCost to pull away the link from the node), so it's totally at a loss about how to proceed in your case We'll try to add support for it for upcoming release. You might as well add four anchor points at the sides instead of one at the center and see how it will work with RoutingOptions.Anchoring = Reassign. Regards, Slavcho Mindfusion


	IP Logged

Pages: 1

‹ Previous Topic | Next Topic ›